FLOWCON range multistage pumps are used in applications where the requirement is for, high pressure or high head pumping of clear or slightly dirty water.

• Heating plants
• Ventilation and Air conditioning plant
• Water works and water supply plants
• Pressure boosting plants
• Circulating water and condensate plants
• Fire extinguishing plants
• Treatment and Purification plants
• Irrigation plants
• Boiler feed water application
• Pressurized water purifing stations

• Horizontal multistage centrifugal pumps with sectional casing and closed impellers clamped between end cover which is incorporated with suction and delivery ports.
• The manufacturing program covers four sizes, with 2 to maximum 14 stages, according to the size, the speed and the shaft seal. Axial thrust balancing is carried out by balancing the impellers separately. The remaining axial thrust is balanced by balancing disc or drum arrangement with adequately sized antifriction bearings.
• The impellers, diffusers, and also the wear rings are interchangeable between stages. Arrangements combining impeller of differing diameter permits within the application field, an optimum adaptation of the performance curve of the pump to the required performance characteristics.
• The pump body is made up of the required number of individual stages, each comprising an impeller, a guide port and a chamber. Stages are spigoted together and the whole assembly is held between end covers by tie rod joints and sealed by 'O' Rings.
• High hydraulic efficiency with quietness and smoothness of operation is achieved by optimising the design of impellers, water passages, Chamber vanes and hydraulic passages. Liquid is transferred from stage to stage with the minimum of frictional resistance, turbulence or shock and the minimum loss of kinetic energy.